安信可 softAP静态IP示例
======

.. raw:: html

   <style>
   body {counter-reset: h2}
     h2 {counter-reset: h3}
     h2:before {counter-increment: h2; content: counter(h2) ". "}
     h3:before {counter-increment: h3; content: counter(h2) "." counter(h3) ". "}
     h2.nocount:before, h3.nocount:before, { content: ""; counter-increment: none }
   </style>

--------------

=========
Wi-Fi SoftAP custom IP Setting Example
=========

Introduction
:::::::::

This example shows how to use the Wi-Fi Station functionality of the Wi-Fi driver of WB2 serial development board and set custom IP address.
 
How to use example
:::::::::
Open the project,set AP_SSID,AP_PASSWORD and custom IP address at line 3,line 4 and line 7.
For example : 
 
 .. code-block:: c

  #define AP_SSID "Ai-WB2"
  #define AP_PASSWORD "12345678"
  #define AP_IP "192.168.100.1"

Finally,running command below to compile project on ubuntu.

make -j8

   

Burn firmware
:::::::::

Running command below to burn firmware after connecting WB2 serial development board to ubuntu.

make flash p=/dev/ttyUSB0 b=921600
  
Debug
:::::
Open the serial port debugging assistant software,select the COM port of the development board,and press the reset button on development board to run the program finally.

Troubleshooting
:::::::::

For any technical queries, please open an [issue](https://github.com/Ai-Thinker-Open/Ai-Thinker-WB2/issues) on GitHub. We will get back to you soon.


简介
:::::::::

本例程主要介绍如何实现WB2系列开发板AP模式下设置自定义IP。

如何使用该例程
:::::::::
打开项目，在第3、4以及第7行设置AP_SSID、AP_PASSWORD以及自定义IP地址
如下： 
 
 .. code-block:: c

  #define AP_SSID "Ai-WB2"
  #define AP_PASSWORD "12345678"
  #define AP_IP "192.168.100.1"

最后，在ubuntu下运行以下指令编译工程。

make -j8

   

烧录固件
:::::::::

将WB2开发板连接ubuntu之后，运行以下指令烧录固件。

make flash p=/dev/ttyUSB0 b=921600
  
调试
:::::
打开“串口调试助手软件”，选择并打开开发板的COM口，最后按下复位键启动程序。

问题排除
:::::::::

若有任何问题，请在github中提交一个[issue](https://github.com/Ai-Thinker-Open/Ai-Thinker-WB2/issues)，我们会尽快回复。